SooPii E25 Cube Power Strip(3 AC Outlets, 3 USB Ports)
- 6 in 1 USB C Socket Cube - A solution for all your device charging needs with one hand. Equipped with 3 AC outlets, 1 USB-A interface and 2 USB-C ports, with 20W fast charging, it offers excellent power support and convenience for your laptops, tablets, mobile phones and other electronic devices. It only takes 30 minutes to charge your iPhone to 50%.
- 【Cube Power Plug with Magnetic Pad】With the magnetic base you can securely fix the cube base where you need it most, for example on the kitchen wall, bedroom wall, living room wall, above and under office desk or game table. The unique design makes sure your desk stays tidy and not bulky.
- 【Full Protection】Cube cubes generally feature built-in safety features such as overload protection, short circuit protection and lightning protection, which can effectively prevent electrical damage and electrical fires and ensure the safety of electricity. Once a short circuit is detected, cut off the power immediately to protect the device from overload damage.
- Save Space - Thanks to the cube-shaped design, the plug not only has a more compact and tidy appearance, but also the sockets are reasonably separated, which avoids the trouble of traditional sockets bothering each other.
- 【Modern and Beautiful】 The cube socket has a stylish design and modern appearance, is suitable for different residential and office environments and offers a practical and beautiful power solution.
- 【Compact & Portable】 3 x 3 x 3 inches, creative magic cube design, small enough to fit in a backpack/briefcase, ideal for home, office or travel.
Warranty
Back Guarantee
Free Shipping
Support
FAQ
Select "Settings" > "Mode" > "AI Power Mode" on the charger screen. In AI Power Mode (also the default mode), the charger automatically detects the voltage of the connected device, identifies device power requirements (high, medium, or low), and adjusts power distribution accordingly for optimal charging efficiency.
On the charger screen, select "Settings" > "Wi-Fi" and turn on Wi-Fi using the knob. On the phone used to log in to the app, make sure Bluetooth has been enabled. Then add the charger to the app and follow the in-app instructions to complete the setup.
To solve this problem:a. Check whether the Wi-Fi name and password configured in the app are correct. The name and password are case-sensitive and space-sensitive.b. Check whether the network is 2.4GHz. The charger only supports 2.4GHz networks, not 5GHz networks.c. Check whether the network signal is normal. Abnormal signals may cause connection failures.d. Check whether Bluetooth is enabled on the phone. To configure the network, connect to Bluetooth first.e. After connecting to Wi-Fi, do not select "Wi-Fi" in the "Settings" menu again. The Wi-Fi signal will be transmitted again, and the Wi-Fi will be disconnected.
The power, voltage, and current on the app are obtained from the cloud to which the charger reports at a specified time. There may be data inconsistencies due to time variance.
The charger's sampling takes place inside the charger, while POWER-Z's sampling takes place at the charger's output or the device's input, which means a loss of power. In addition, the charger's readings have only one decimal place, while POWER-Z's readings have four decimal places.
The clock screensaver is displayed when the following conditions are met:• The charger connects to Wi-Fi.• The screen timeout is not set to "Always On."• The screensaver is set to "Clock Screensaver" and the timeout time is reached.• The charger screen is not manually turned off.
The charger might not have received the deletion command due to network errors of the phone or charger. To solve this problem:a. Reconnect the power cord of the charger.b. Access "Settings" > "Wi-Fi" to connect to the Wi-Fi again.
Possible causes:• The device is connecting to ports other than C1. Only the C1 port supports 140W output. To connect to the C1 port, make sure to use cables with a power rating of 140W or higher.• Incorrect cables are used for charging Apple MacBook Pro (16"). To achieve 140W output power, Apple MacBook Pro (16") with M1 or M2 chips must use USB-C to MagSafe cables for charging, while Apple MacBook Pro (16") with M3 chips can use USB-C to USB-C or USB-C to MagSafe cables for charging.• The charging power is related to the device battery level. When the device battery level is almost full, the charging power is reduced to protect the device.