SooPii CS60 Pro Charging Station(90W,6 Ports,4PD) with 6 mixed cables
- 【90W 6-Port Super Charger: Power All Your Devices at Once】Upgrade your charging with our 90W station. It features 4 USB-C and 2 USB-A ports to charge 6 devices at once—like phones, tablets, and headphones. Replace multiple wall chargers and eliminate cable clutter. This hub keeps your desk, nightstand, or kitchen counter organized and outlets free.
- 【4x 20W Power Delivery Ports: SuperFast Charging】Get Rapid Charging from four 20W USB-C PD ports. Quickly charge an lPhone 17/16/15 to 50% in about 30 minutes, and supports fast charging for Galaxy S25/S24. The smart chip identifies each device to deliver the optimal current for both speed and battery safety.
- 【No Extra Cost & Hassle: With 6 Cables & 2-in-1 Holder】Everything you need is included. This bundle comes with 6 premium cables (2x USB-C to Light-ning, 2x USB-C to C, 2x USB-A to Light-ning) and a 2in1 holder for i Watch and Air-Pods. With 7 detachable dividers, you can customize the space to keep all your devices charged and organized, saving you time and money.
- 【Advanced Active-Shield Safety: Charge with Confidence】Your devices are protected by the Active-Shield safety system. It guards against over-current, over-voltage, overheating, and short circuits. The intelligent chip and temperature sensor monitor and adjust power output for safety during charging.
- 【Sleek Design with LED Indicator: The Perfect Gift for Any Occasion】Features a modern design with a soft-glowing LED indicator, clear the charging status by the led light from the corresponding port. A thoughtful gift for family, friends, or colleagues to organize their space at home, office, or while traveling. Backed by our reliable 24-month warranty and supportive customer service.
Warranty
Back Guarantee
Free Shipping
Support
FAQ
Select "Settings" > "Mode" > "AI Power Mode" on the charger screen. In AI Power Mode (also the default mode), the charger automatically detects the voltage of the connected device, identifies device power requirements (high, medium, or low), and adjusts power distribution accordingly for optimal charging efficiency.
On the charger screen, select "Settings" > "Wi-Fi" and turn on Wi-Fi using the knob. On the phone used to log in to the app, make sure Bluetooth has been enabled. Then add the charger to the app and follow the in-app instructions to complete the setup.
To solve this problem:a. Check whether the Wi-Fi name and password configured in the app are correct. The name and password are case-sensitive and space-sensitive.b. Check whether the network is 2.4GHz. The charger only supports 2.4GHz networks, not 5GHz networks.c. Check whether the network signal is normal. Abnormal signals may cause connection failures.d. Check whether Bluetooth is enabled on the phone. To configure the network, connect to Bluetooth first.e. After connecting to Wi-Fi, do not select "Wi-Fi" in the "Settings" menu again. The Wi-Fi signal will be transmitted again, and the Wi-Fi will be disconnected.
The power, voltage, and current on the app are obtained from the cloud to which the charger reports at a specified time. There may be data inconsistencies due to time variance.
The charger's sampling takes place inside the charger, while POWER-Z's sampling takes place at the charger's output or the device's input, which means a loss of power. In addition, the charger's readings have only one decimal place, while POWER-Z's readings have four decimal places.
The clock screensaver is displayed when the following conditions are met:• The charger connects to Wi-Fi.• The screen timeout is not set to "Always On."• The screensaver is set to "Clock Screensaver" and the timeout time is reached.• The charger screen is not manually turned off.
The charger might not have received the deletion command due to network errors of the phone or charger. To solve this problem:a. Reconnect the power cord of the charger.b. Access "Settings" > "Wi-Fi" to connect to the Wi-Fi again.
Possible causes:• The device is connecting to ports other than C1. Only the C1 port supports 140W output. To connect to the C1 port, make sure to use cables with a power rating of 140W or higher.• Incorrect cables are used for charging Apple MacBook Pro (16"). To achieve 140W output power, Apple MacBook Pro (16") with M1 or M2 chips must use USB-C to MagSafe cables for charging, while Apple MacBook Pro (16") with M3 chips can use USB-C to USB-C or USB-C to MagSafe cables for charging.• The charging power is related to the device battery level. When the device battery level is almost full, the charging power is reduced to protect the device.